• <kbd id="aeese"></kbd>
  • <blockquote id="aeese"></blockquote>
  • <xmp id="aeese">
  • <noscript id="aeese"></noscript>
  • <small id="aeese"><input id="aeese"></input></small>
  • <u id="aeese"></u>
  • Hubei Weigong Environmental Protection Technology Co., Ltd
    Contact person: Manager Wu
    Tel: 13707271581
    website:
    Address: group 3, Yaogang village, Wudian Town, Zaoyang City

    Hot Line

    News and information Position: Home ? News Center  ? News and information
    Teach you how to solve the basic fault of granulator

    Sources:Hubei Weigong Environmental Protection Technology Co., Ltd | PublishDate:2021.03.04

    As we all know, the environment-friendly plastic granulator is actually a molding machine that can process materials into specific shapes. The main function of the environment-friendly plastic granulator is to deal with the plastic raw materials needed for waste plastics in daily life, and the price of recycled plastics is cheaper than that of the plastic raw materials rising in recent years. At the same time, with the strong support of our country, we should constantly update to achieve the purpose of "regeneration". In the whole update process, there are three basic faults, so how to solve them
    1. The basic screw operation is normal, but the material is not discharged: this phenomenon is mainly due to the discontinuous operation of the hopper in the whole feeding process, and the foreign matter in the feeding port is blocked, resulting in the "bridging" phenomenon. Metal hard objects fall into the screw slot, the screw slot is blocked, resulting in abnormal paper feed.
    Increase the feeding amount, make the screw feeding continuous and stable, stop the operation process immediately, remove the foreign matters at the feeding port, and eliminate the "bridging" phenomenon. If it is confirmed that there are metal foreign bodies, the plastic machinery should be stopped immediately and the screws should be unscrewed until the metal foreign bodies are removed, and then they can be put into the normal production process.
    2. Waste: raw materials are dirty or contain impurities, feeding speed is too fast, screw extrusion is unstable, and plasticizing temperature is insufficient. Extrusion problem of environmental protection plastic mechanical granulator. First of all, the raw materials should be cleaned or the filter screen should be replaced to effectively reduce the feed quantity, so that the plasticizing stable screw can be smoothly extruded and the plasticizing temperature can be increased.
    3. When the main machine does not rotate or stops temporarily, the power supply of the main motor of the environmental protection plastic mechanical granulator is poorly connected or not connected. During the heating process, there is not enough time, or one of the heaters usually does not share the floor space. At this time, we should check the temperature display of each stage, confirm the preheating time, check whether each heater is damaged or defective, and correct it in time.
  • <kbd id="aeese"></kbd>
  • <blockquote id="aeese"></blockquote>
  • <xmp id="aeese">
  • <noscript id="aeese"></noscript>
  • <small id="aeese"><input id="aeese"></input></small>
  • <u id="aeese"></u>
  • 性tube老少配job_538偷拍妇科检查露脸_japanese高潮喷出_免费女性裸体啪啪无遮挡网站