How to make granulator work efficiently with high output is a problem concerned by customers.
For granulator, granulation system is an important section of the whole processing technology, and granulator is the key equipment in granulation system. Whether its operation is normal and proper will directly affect the quality of the final product. According to years of production experience, how to correctly master the operation of the whole granulating system is summarized as follows:
1. There should be magnetic separation device before granulation, so that the mold will not be damaged and unnecessary loss will be avoided.
2. The particle size of the powder to be granulated should have a certain proportion: generally, the material is less than 2 / 3 of the diameter of the ring mold hole, and all the sieves pass through.
3. The purpose of quenching and tempering or adding water: A. improve the production efficiency; B. extend the service life of the ring mold; C. reduce the energy cost.
4. The moisture content should be controlled between 15% and 18% after conditioning. Under the condition of uniform moisture, the molding rate is higher and the density is higher.
The quality and output of product particles are closely related to the technology of operators. In order to make the granulator more productive and efficient, it is necessary to understand the "temperament" of the equipment, so as to make the granulator serve us better.

Relevant articles

Related products